Indicator LED
The electrical power used by a small light-emitting diode that indicates device status.
How big is it?
50 mW · power
Power · example

A little perspective
Indicator LED vs Single-mode laser pointer optical output: power comparison
The power of an indicator LED is about 10 times the optical output of a single-mode laser pointer.
ENERGY EACH SECOND
The electrical power used by a small light-emitting diode that indicates device status.
Single-mode laser pointer optical output is the continuous visible light power emitted by a standard handheld laser pointer operating in a single spatial mode.
Measurements, assumptions & sources +
Indicator LED
Power: 50 mW; example.
A chosen 50 mW electrical input.
Defined examples — our methodology
The marked power is calibrated. Unmeasured illustration details are representative.
Single-mode laser pointer optical output
Rated continuous optical output: 5 mW; defined upper reference; range 1 mW–5 mW.
A defined 5 mW visible laser pointer output. The 0.3 J comparison is power multiplied by 60 seconds; beam class, wavelength and actual output matter.
US FDA — Laser products and instruments
The marked rated continuous optical output is calibrated. Unmeasured illustration details are representative.
Use the visual comparison to explore its scale, then check the measurements and sources.
Change your perspective
Put it next to…
Choose a suggestion to redraw the comparison, or open its page to learn what it is.
Why this measurement?
Why we use 50 mW
We compare the power of an indicator LED. This is an illustrative comparison value, not a claim that every example is the same.
A chosen 50 mW electrical input.
The picture identifies the subject; the diagram compares the recorded values. How calibrated comparisons work →
Recorded properties
Dimensions and measurements
| Property | Selected value | Recorded range | Basis |
|---|---|---|---|
| 50 mW | Not recorded | example |
Around this scale
Explore nearby values.
Compare examples with lower, similar and higher values. Each card names the measurement being compared.
Sources and method
Want to check the number?
The source records and measurement method remain available for inspection.
There’s always another scale





